The trick is, it doesn't work.sorta. Open the drive after the drive mount appears on the desktop.I might be able to get a Power Mac G3 for nothing (it's one of those beige desktops, not the cooly blue towers). Insert the G3 Auto Printer Installation disk into the CD/DVD ROM drive on your Mac. This space should have enough vertical space to allow for easy loading of media into the input hopper. Unpack the G3 Auto Printer and place it in the selected workspace. G3 Auto Printer Installation 1.After that, take out the USB cable and connect the phone to the computer.1 - > Open Kext Wizard > click on 'Installation' tab > drag and drop the file you've just downloaded and drop it in the middle of the app screen > click on Install. I don't know much about the loaded software, or about what version of MacOS its using either, but I'd really like to have something I can tear into for educational purposes View image: /infopop/emoticons/icon_biggrin.gifHere is how you can use the software to enter the LG G3 download mode and. How hard is it to work on Mac hardware? If I get this, it'll be my first Mac (I've got a nice-ish pc at home), so I don't know a whole lot about the critters (I work with an iMac at work, but "working with" and "knowing about" are two different things). Current version licenses will activate older version software (V9 and above), if the product/s.If you are one of those people with a G3, G4 or G5 Mac, and dont want to bother yourself with trying to find old installer CDs, I will show you how you can install Mac OS 10.3 (not tested), 10.4 and 10.5 on your PowerPC from a USB stick.Now you may think that you already can do that by just holding the Alt key, but these machines are a bit too old for that.I would recommend first trying 10.4. My work might give it to me, so I'm already planning on finding ways to improve it *grin*Memory 8 GB RAM 8 GB free disk space on the system drive.
![]() For An Old G3 A Usb Card Upgrade RAM AndNeither one is that expensive. And of course LinuxPPC.Could be a drive that's going bad, could be a bad power supply. And if you plan to use your new Mac on a network, keep in mind that these machines have a 10MBit Ethernet interface.As far as system software is concerned, a beige G3 can run everything from Mac OS 8.1 (don't know about 8.0, but probably) up to OS X. Beige G3's only have standard EIDE, so if you want some HD throughput, either check out Sonnet Tech's ATA controllers or go for a UltraSCSI setup. I suggest you go look for a Formac PCI video card, either a ProMedia or a ProFormance 2 (I used to have a Formac ProMedia 3D in mine still use it as a secondary card in a Sawtooth G4), and hook up another monitor on the built-in ATI as an additional display (you will probably need some sort of adaptor, though).Oh, and you probably want to upgrade RAM and HD. Plus, they're kinda slow by todays standards.I'd recommend the various models that Sonnet has. DON'T ASSUME a card is compatible. The power supply is a bigger investment to discover, the hard way, there's a problem on the motherboard causing the inconsistent power up.Load it up as 808 suggests, or you'll discover it runs OS 9.1 just fine.If you decide to get and upgrade card (also reasonably priced now probably very decent after Christmas) be certain to check for OS X compatibility.B card in there (that's what the sticker says), two empty PCI slots, and the whole shebang is dated. I can see a Asante`FAST 10/100 Rev. Yes, I'm on my lunch break View image: /infopop/emoticons/icon_biggrin.gifIt's a Power PC G3 233mhz/512k cache, w/32meg ram, 4 gig hd, 24x cd. Make certain you're getting a current model, compatible card.You could save money and probably go in other directions, ignoring OS X, but I think you'll regret it sooner or later.Trying to type as I've got the mac in question between my knees to read the back, and eating green beans at the same time. Correction on the drive, though. Convoluted lookingsetup.The drives look pretty standard, except for that wretched motorized floppy drive (sorry, I had those things, no real reason tho). The sound is on some sort of card type I haven't encounterd before in my PC centric existance, but makes me think of my AGP slot (don't know why, this is longer). That machine is just old enough for the battery to have died. Is it hard/expensive to replace the power supply on this model?It really sounds like that machine has a bad PRAM battery. After that check the power supply? I'm hoping it's not the mobo. It doesn't seem too terribly dusty in there (slight layer, but otherwise clean.no dust bunnies).All the ram slots are filled, so it should be more than 32 megs ram.Is any of this useful? It got re-iterated to me that it worked great when it worked, but when you turned the power off there was no way of telling if/when it would turn back on (if it's just the stupid power button View image: /infopop/emoticons/icon_smile.gif ).I'll try the harddrive first, although I doubt it'll like the one I've got (I'll see if I can scurry up an old mac hd from a friend). There's also a Microtech chip/card attached to the mobo on a daughtercard looking setup (one of the chips has a 4mb sticker on it). I see the little battery thingie, no idea how old it is, though. Out of office greyed out outlook for macThe Card is called a "Personality Card" and was only on the beige G3 PowerMacs. The jacks are just input and output, nothing more. Yeah it's got audio jacks on it, but Macs handle audio through software, not hardware. I want to say its a 3.3volt Lithium battery, but I've been separated from my Macs for a few months now so my memory may be off.That sound card isn't really a sound card. Lot's of electronics stores or computer stores will have them, but it's probably best to bring the old battery with you. I had a similar problem with an abandoned G3 I got a while back and those two solved it. The bad ones will say "Royal" on them, though not all of the "Royal" ones are bad.The voltage regulator is obcenely expensive, so I would try the PRAM battery and power supply first. The voltage regulator sits just in front of the PCI slots (IIRC) and has kind of a ceramic donut looking thing wrapped in copper wire on it. (I've done it on a beige G3, other machines I don't know for sure.) The factory power supply is something odd like 172watts, but more than that won't hurt.Oh yeah, other thing that may cause a start-up problem on a beige G3, some of them had bad voltage regulators. It was Apple's way of having some diversity of models without having a different motherboard for each of them.If that machine has a problem with the power supply, an off-the-shelf ATX power supply will work on that.
0 Comments
Leave a Reply. |
AuthorMalik ArchivesCategories |